Non-Melt Saws

When cutting acrylics and plastics, "chip-welding" – a melting of the material is a concern. But not with these Non-Melt blades. With a modified triple-chip grind and a 2° negative hook angle, they produce less heat than a standard blade, leaving a crisp and smooth edge.

Excellent for Cutting

Plastics
Acrylonitrile Butadiene Styrene (ABS)
Acetal
Acrylic
Acrylic Sheets
Alupanel®
Copolymer
Coroplast®*
Correx Boards
Corrugated Polypropolyene
Delrin
Epoxy
Ethylene-Vinyl Acetate
Foam Board
Gatorfoam®**
High Density Polyethylene (HDPE)
High Impact Polystyrene (HIPS)
High Pressure Laminates (HPL)
Low Density Polyethylene (LDPE)
Lucite®
Mechanical/Engineered Plastics
Nitrile Rubber
Nylon
Perspex® Cast Acrylic Sheet
Plastic Laminate Flooring
Plexiglas®
Poly (methyl methacrylate) (PMMA)
Polycarbonate (Lexan™)
Polyethylene (PE)
Polyethylene Terephthalate (PET)
Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
Polypropylene (PP)
Solid Surface
Styrene-Acrylonitrile
Styrene-Butadiene Rubber (SBR)
Styrene-Isoprene-Styrene (SIS)
Teflon®
Thermoplastic Polyolefin (TPO)
Trespa® Meteon®***
Ultra High Molecular Weight Polyethylene (UHMWPE)
Wood
:

* A soft plastic cardboard made with super soft super flexible PVC.

** A polystyrene foam board bonded between two layers of Luxcell® wood-fiber veneer.

*** Decorative high-pressure compact laminate (HPL) with an integral surface.